Installation Videos
Every wrap ships with the same air-channel vinyl, so the technique below works whether you're skinning a laptop, a phone or a games console.
watch & learn
Application, step by step
Laptop skin: full lid application
Start to finish on a 13-inch lid, including how to handle the hinge edge.
Mobile skin: camera cut-out alignment
Getting the camera ring and button cut-outs perfectly seated on a phone back.
Removing bubbles with a squeegee
The air-channel trick that pushes trapped air out to the nearest edge.
Tablet skin: corner wrapping
How to wrap rounded tablet corners without stretching or lifting the print.
Card skin: contactless-safe application
Applying a card skin without covering the chip or blocking NFC.
Re-positioning without residue
What to do if you get the angle wrong on the first attempt.
the short version
Four steps, every time
Clean the surface
Wipe down with the included alcohol pad and let it dry fully — any dust under the vinyl shows.
Peel halfway
Lift the backing about a third of the way and set the first edge down before peeling further.
Align, then commit
Use the cut-outs as your guide. The vinyl is repositionable, so nudge it before pressing down.
Squeegee out from centre
Work air bubbles out toward the nearest edge in straight, overlapping strokes.